Market Research Blog

According to the latest research by FMI, Portable MRI Market are set to witness a high growth of CAGR 6.8% during the year 2021-2031.

Portable MRI is an emerging tool during the COVID-19 pandemic. The introduction of low cost solutions in terms of portable MRI scanners is expected to enable new point-of-care and monitoring applications. With existing MRI scanners in centralized settings, accessibility and reduction of cost is primal.

Upcoming advancements in computational technology, hardware as well as expanding scanning-based technology industry in developing economies is set to effectively lead towards boosting sales of portable MRI.

Factors associated with the compatible applications of portable MRI in hospital environment and the reduced risk associated with lower magnetic strength of portable MRI are set to advance imaging services with expense mitigation, globally.

Portable MRI sales are expected to greater expansion over the forecast period owing to the strength of the factors mentioned above.

What is Driving Demand for Portable MRI?

The demand for portable MRI is driven by the premise of expansive reach of MRI through cost reduction. The applications of portable MRI provide support in terms of cost, sitting and operational burdens which is directly applicable to benefitting the overall healthcare development by increasing the access to MRI examinations for a larger number of patients. Additionally, portable MRI yields a higher rate of use with varied applications.

Not to mention, in cases of acute neurological settings, the application of portable MRI will positively impact patient health with non-invasive and time-sensitive neuroimaging. The benefits of this approach can potentially be employed in the assessment of neurological injury in various medical setups, including environments with limited resources.

To remain ‘ahead’ of your competitors, request for a sample @ https://www.futuremarketinsights.com/reports/sample/REP-GB-14215

Which Factors are likely to Augment Growth of Portable MRI?

Technological advancements in terms of MRI scanners, especially specialty scanners has introduced a unique method of imaging. The costs associated with such scanners exhibited sub-optimal commercialization as compared to the prevailing models. The augmentative factor which provides leverage to portable MRI sales is the ease of access and potential for commercialization because of the advent of the COVID-19 pandemic.

U.S. and Canada Portable MRI Outlook

Introduction of COVID-19 pandemic over the globe impacted the magnetic resonance departments across the United States in terms of reduced procedure volume. The region of North America is expected to exhibit growth in terms of portable MRI sales over the forecast period. The growth is catalyzed by the increasing patient pool in the region as well globally, and rising awareness towards early diagnosis of diseases.

To quote health information provided by the Govt. of Canada on their website “44% of adults 20+ have at least 1 of 10 common chronic conditions”. Portable MRI demand in Canada is expected to increase over the forecast period owing to the rising prevalence of chronic diseases and growing geriatric population.

Europe Demand Outlook for Portable MRI

The region of Europe is projected to occupy a large share after North America in the adoption of portable MRI due to the rising prevalence of chronic diseases in the region, as well as increasing technological advancements, resulting in high demand for medical imaging devices.

The growth is also associated with the growing popularity of teleconsultation and teleradiology in the region, especially in countries like Germany. Demand of portable MRI in the region is lucrative and based upon the premise to fight cancer by employing cost-efficient and accessible diagnostic imaging solutions.

Who are the Key Manufacturers and Suppliers of Portable MRI?

Key companies operating in manufacturing and supply of Portable MRI are

• GE Healthcare
• Siemens Healthineers
• Philips Healthcare
• Canon Medical Systems
• Hyperfine
• Voxelgrids
• PrizMed Imaging.

For critical insights, request for PDF Brochure @ https://www.futuremarketinsights.com/reports/brochure/rep-gb-14215

Why Future Market Insights?

• Comprehensive analysis on evolving purchase pattern across different geographies
• Detailed insights of market segments and sub-segments for historical as well as forecast period
• A competitive analysis of prominent players and emerging players in the keyword market
• Detailed information about the product innovation, mergers and acquisitions lined up in upcoming years

Ground breaking research and market player-centric solutions for the upcoming decade according to the present market scenario

About FMI:

Future Market Insights (FMI) is a leading provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in Dubai, the global financial capital, and has delivery centers in the U.S. and India. FMI’s latest market research reports and industry analysis help businesses navigate challenges and make critical decisions with confidence and clarity amidst breakneck competition. Our customized and syndicated market research reports deliver actionable insights that drive sustainable growth. A team of expert-led analysts at FMI continuously tracks emerging trends and events in a broad range of industries to ensure that our clients prepare for the evolving needs of their consumers.

Contact Us:

Mr. Debashish Roy
Unit No: AU-01-H Gold Tower (AU), Plot No: JLT-PH1-I3A,
Jumeirah Lakes Towers, Dubai,
United Arab Emirates
MARKET ACCESS DMCC Initiative
For Sales Enquiries: sales@futuremarketinsights.com
For Media Enquiries: press@futuremarketinsights.com
Website: https://www.futuremarketinsights.com

According to latest research by FMI, gel implants will experience substantial growth with CAGR 3.1% during the forecast period 2021-2031. Increased demand for gel implants is expected to encounter due to the rising demand of cosmetology. Increasing awareness of cosmetology procedures is expected to present lucrative opportunities to the key players of this demand outlook in the near future.

What is Driving the Demand of the Gel Implants Market?

The main factors driving the growth of the gel implants market include the increased focus on physical appearance and the increasing availability of inexpensive silicone cohesive breast implants. In addition, the increasing prevalence of breast cancer and the availability of a wide range of breast implants are driving the growth of the market.

For instance, according to the America Society of Plastic Surgeons, it was estimated that approximately 1,93,073 breast augmentation surgeries were performed in 2020.

Silicone gel implants were highly preferred by all the women seeking breast augmentation surgeries since they have higher quality in terms of appearance and firmness as compared to saline ones. Thus, the increased preference of the target population is expected to increase the demand during the forecast period.

Breast augmentations are becoming increasingly popular in emerging markets. The main reasons for this are increased economic prosperity and disposable income amongst the working population, increased influence of the cosmetic and fashion industry, increased people’s awareness of the latest products and processes, and low business start-up costs.

The growing prevalence of breast cancer is another key driver that is anticipated to propel the growth of the gel implants market. According to WHO, in the year 2020, the number of diagnosed cases of breast cancer were a staggering 2.3 million, and around 685,000 deaths occurred due to breast cancer, globally.

To remain ‘ahead’ of your competitors, request for a sample @ https://www.futuremarketinsights.com/reports/sample/REP-GB-14220

The increasing prevalence of breast cancer has led to an increase in the number of women undergoing breast mastectomy, that is, breast augmentation. Surgical removal of one or both breasts, leading to more women undergoing breast augmentation. According to the American Society of Plastic Surgeons, approximately 36,367 women underwent breast augmentation surgeries as a preventative measure against breast cancer. Increased awareness amongst women about preventative procedures against cancer is another key driver of the gel implants market.

Prayasta: Using 3D Technology for Breast Augmentation

Bengaluru based start-up ‘Prayasta’ is reaching new heights in the breast augmentation industry. The company was established in 2017 and is developing a 3D printing technology to manufacture personalized breast implants for the target audience.

They have developed an in-house printer Silimax P250, from scratch to cater to the women who have to undergo mastectomy either due to suffering from breast cancer or as a preventative measure. The company wants to ensure the “one-to-one personalization” for all the women since every women’s body is different in structure, size, and shape so that they can provide the implant which is closest to its natural counterpart.

U.S. and Canada Gel Implants Demand Outlook

U.S. and Canada regions hold a large chunk of the gel implants market. The reason for such a high market share is due to the increased awareness of breast cancer, which is leading to many women opting for preventive mastectomy procedures.

Increased popularity and adoption of gel implants due to the higher efficacy of cohesive gel implants is expected to fuel the growth of this demand in the forecast period in this region.

For instance, on October 20, 2021, Sientra, Inc. announced that they have collaborated with a nonprofit organization ‘Mission Plasticos’ dedicating their venture to provide reconstructive surgical care to medically underserved and needy communities around the world with their program “ Reshaping Lives: Full Circle”.

Europe Gel Implants Demand Outlook

Europe holds a moderately high share in the global gel implants market. Factors such as the rising occurrence of breast cancer in Europe and the rise in breast cosmetic operations are likely to boost the market’s growth.

On the other hand, due to the disadvantages of breast implants, such as scarring or rippling, the market is anticipated to suffer a negative impact. In Europe, breast augmentation is the most popular cosmetic operation.

For instance, in April 2019, The German Federal Cabinet announced the initiation of a digital implant register for all the German patients to ensure the safety of all the patients undergoing implant surgeries.

Who are the Key Manufacturers of Gel Implants?

The key manufacturers of gel implants are

• Allergan Inc.
• Arion Laboratories
• Cereplas
• Establishment Labs
• Mentor Woldwide LLC (Johnson & Johnson Services Inc.)
• GC Aesthetics PLC
• Sientra Inc.
• Groupe Sebbin SAS

For critical insights, request for PDF Brochure @ https://www.futuremarketinsights.com/reports/brochure/rep-gb-14220

Why Future Market Insights?

• Comprehensive analysis on evolving purchase pattern across different geographies
• Detailed insights of market segments and sub-segments for historical as well as forecast period
• A competitive analysis of prominent players and emerging players in the keyword market
• Detailed information about the product innovation, mergers and acquisitions lined up in upcoming years

Ground breaking research and market player-centric solutions for the upcoming decade according to the present market scenario

About FMI:

Future Market Insights (FMI) is a leading provider of market intelligence and consulting services, serving clients in over 150 countries. FMI is headquartered in Dubai, the global financial capital, and has delivery centers in the U.S. and India. FMI’s latest market research reports and industry analysis help businesses navigate challenges and make critical decisions with confidence and clarity amidst breakneck competition. Our customized and syndicated market research reports deliver actionable insights that drive sustainable growth. A team of expert-led analysts at FMI continuously tracks emerging trends and events in a broad range of industries to ensure that our clients prepare for the evolving needs of their consumers.

Contact Us:

Mr. Debashish Roy
Unit No: AU-01-H Gold Tower (AU), Plot No: JLT-PH1-I3A,
Jumeirah Lakes Towers, Dubai,
United Arab Emirates
MARKET ACCESS DMCC Initiative
For Sales Enquiries: sales@futuremarketinsights.com
For Media Enquiries: press@futuremarketinsights.com
Website: https://www.futuremarketinsights.com

The global stainless steel welded pipe market is expected to reach US$ 16.36 Bn in 2021 with a stable long-term projection, according to the latest insights from Future Market Insights, ESOMAR-certified research and consulting firm. The report offers an analysis of 20+ high-growth markets, providing detailed insights on the stainless steel welded pipe market’s growth in the next decade.

Demand for stainless steel welded pipes decelerates as operations across construction, automotive, water supply and distribution, oil and gas, petrochemical and fertilizers, power generation, and other sectors were hampered amid the COVID-19 outbreak. However, considering the possibility of a stimulus for infrastructure projects in many countries, the long-term outlook of the market remains positive.

Get | Download Sample Copy with Graphs & List of Figures: https://www.futuremarketinsights.com/reports/sample/rep-gb-7392

The surge in demand for stainless steel welded pipes from applications such as oil and gas will remain a chief growth driver due to the presence of oil rigs all over the globe. For the transportation of the fluid from one place to another, a large quantity of pipes is required, which will drive the sales in the market. The same applies to the water supply and distribution segment because the demand is expected to surge amid the rising need for an uninterrupted water supply.

The replacement of old pipes with new stainless steel welded pipes can also provide a boost in the sales of stainless steel welded pipes. The substantial increase in the demand from the supplier side and from the end-use industries across the globe is propelling the stainless steel welded pipe market growth.

The use of stainless steel welded pipes in construction and automotive and power generation applications will create solid opportunities for growth. According to FMI, the construction sector is expected to account for nearly 29% of sales in the market by 2031. Investment in residential, commercial, and infrastructural construction projects will increase in the future, paving way for the expansion of the market.

Stainless Steel Welded Pipe Market Key Takeaways

• The stainless steel welded pipe market is expected to grow at 4.6% CAGR between 2021 and 2031
• Investment in construction projects will remain a chief growth driver in the U.S., enabling it to account for nearly 72% of sales in North America
• Focus on improving public infrastructure will drive growth in the U.K. market at 5.5% CAGR between 2021 and 2031
• India is expected to register increasing investment in water supply and distribution to ensure safe drinking water to all citizens and support industrialization. This will create attractive opportunities for stainless steel welded pipe sales
• China will emerge as a highly lucrative market in East Asia, accounting for maximum sales of stainless steel welded pipes

“As competition continues to grow, companies operating in the market are likely to adopt strategies for strengthening their global footprint. Besides expanding operations across emerging nations, they are likely to focus on launching better quality stainless steel welded pipes to gain competitive edge” says FMI analyst.

The stainless steel welded pipe market is likely to grow at a moderate pace during 2021-2031. However, as it is a matured market, companies are expected to concentrate further on research and development activities to develop more in the field of construction, oil & gas, and water supply and distribution, majorly focusing on the outer diameter required for the specific applications. Collaboration with local players and developing new technology in the form of advanced stainless steel welded pipes is a prime strategy expected to increase in popularity in the forecast period.

Request a Complete TOC of this Report with figures: https://www.futuremarketinsights.com/toc/rep-gb-7392

Will Growing Automotive Industry Propel the U.S? Market Growth?

The U.S. stainless steel welded pipe market is expected to rise at 4.4% CAGR between 2021 and 2031. The growth forecast for the U.S. market remains positive on account of the increasing demand from the automotive industry and construction industry. The U.S. automotive industry not only produces vehicles for domestic sales, but also exports vehicles, and to fulfill the demand auto industry players have to manufacture efficiently. Stainless steel welded pipes are used for making mufflers and exhausts in the automotive industry, which propels the growth of the stainless steel welded pipe market in the United States.

How is Germany relevant to the Stainless Steel Welded Pipe market?

After a brief period of declining growth in 2020, the German market is expected to register 4.3% y-o-y growth in 2021. The German stainless steel welded pipe market will witness an appreciable growth on account of the increasing demand from the automotive and aerospace industries. Germany comes under the tag of the top 10 steel-producing countries with a market volume of 39.7 Million Tons in 2019. Stainless steel which is made in Germany is also very popular in sales due to its lower carbon content and is softer which makes them more durable than American grade Stainless Steel.

Stainless Steel Welded Pipe Market Segmentation

By Grade

• 300 Series
  • 304, 304L & 304H
  • 309 & 310S
  • 316, 316L, 316H, 316TI
  • 321/321H
  • 347/347H
• 400 Series
  • 409
  • 410/410S
• 900 Series
• Nickel Alloy Grade
  • Duplex 2205
  • Duplex 2207

By Application

• Construction
• Automotive
• Water Supply and Distribution
• Oil and Gas
• Petrochemical and Fertilizers
• Power Generation
• Others

By Outer Diameter

• 4 – 36mm
• 36 – 60 mm
• 61 – 150 mm
• 151 – 500 mm
• 500 – 1000 mm

By Region

• North  America
• Latin America
• Europe
• East Asia
• South Asia & Pacific
• Middle East & Africa

Stainless Steel Welded Pipe Market Competitive Landscape

The market is fragmented, with key players accounting for approximately one-fifth of the market share. These players are likely to invest in new technology developments and the expansion of their networks to maintain their market shares. Some of the key players in the market are Marcegaglia, Sosta GmbH & Co. KG, ArcelorMittal S.A., Nippon Steel, Hyundai Steel Co., Ltd, Sandvik AB, Shanghai Metal Corporation, FROCH ENTERPRISE CO., LTD., F.E.R. Fischer Edelstahlrohre GmbH, YC Inox, JFE Steel Corporation, CSM TUBE spa, Guangzhou Pearl River Petroleum Steel Pipe Co., Ltd., Guangdong Lizz Steel Pipe Co, Ltd., Foshan Zhongde Stainless Steel Co., Ltd. & others.

For More Information or Query or Customization Before Buying, Visit: https://www.futuremarketinsights.com/customization-available/rep-gb-7392

Get Valuable Insights into Stainless Steel Welded Pipes Market

Future Market Insights, in its new offering, provides an unbiased analysis of the global stainless steel welded pipes market, presenting historical demand data (2016-2031) and forecast statistics for the period from 2021-2031. The study divulges compelling insights on the market based on grade (300 series, 400 series, 900 series, and nickel alloy grade), application (construction, automotive, water supply & distribution, oil & gas, petrochemical & fertilizer, and power generation), an outer diameter (4 – 36 mm, 36 – 60 mm,  61 – 150 mm, 151 – 500 mm, and 500 – 1000 mm) across seven major regions.

The approximately US$ 200 million market for 3D motion capture technology is set to witness strong growth over the forthcoming years. Up from the revenues attained in 2021, the 3D motion capture market is likely to see more than 13% Y-o-Y growth in 2022. As depicted in a new study of Future Market Insights (FMI), over 40% of overall demand for 3D motion capture will be accounted by hardware, followed by software.

Request a Sample of this Report @ https://www.futuremarketinsights.com/reports/sample/rep-gb-9499

Global sodium silicate market will grow gradually at 3% CAGR between 2019 and 2029. Sodium Silicate products will witness an uptake in sales on the back of eco-friendly properties of the compound. Market players are innovating end-use applications that cater to the need for viable alternatives of conventional adhesives, binders, and cleaning agents.

Readily available raw materials such as silica sand, soda ash, and rice husk further propel manufacturing of sodium silicate. Supply and demand for the product exhibit cohesive growth trajectory during the forecast period (2019-2029).

Request a sample to obtain authentic analysis and comprehensive market insights at- https://www.futuremarketinsights.com/reports/sample/rep-gb-11173

Sodium silicate manufacturers can earn profitable revenues by leveraging opportunities presented by prevalence of environment efficient rubber tires, wastewater treatment, and soil stabilization. Market players are developing products for untapped industries such as welding, agriculture, and food.

Key Takeaway of Sodium Silicate Market Study

• Sodium Silicate market is valued at US$ 5.6 Bn in 2018 growing at a lackluster CAGR during the forecast period.
• Asia Pacific (APAC) holds a major market share with more than 53% of the total market value. India, a developing economy in APAC is expected to grow at a promising 5% CAGR from 2019 to 2029.
• Amid resurgent infrastructure industry and growing demand for green-alternatives, demand from the US will grow at an astounding 12% CAGR through the end of 2029.

Developing economies such as India, Indonesia, and South Korea are investing in infrastructure development. Sodium silicate is an ideal binder for sustainable construction practices. Market players must leverage this opportunity and procure profitable revenues for the forecast period.

Discover more about report analysis with figures and data tables, along with the table of contents. Ask an Analyst- https://www.futuremarketinsights.com/ask-question/rep-gb-11173

Infrastructure Impels Future Demand Growth

Major manufacturers of sodium silicate are involved in research and development of products, mergers, acquisitions, and expansion of global footprint via strategic stakeholder partnerships. APAC reigns supreme with share-wide dominance, attributable to surge in demand for end-use industry products that employ sodium silicate such as rubber tires, water treatment, and construction. North America offers lucrative growth opportunities where the US exhibits a double digit 12% CAGR during the forecast period.

Recovering infrastructure in the US propels regional growth during the forecast period. European countries such as Germany is driven by increasing demand for compound in pulp & paper, healthcare, and elastomer filler for rubber tires. Emerging economies in Latin America and MEA are following the footsteps of early adopters with infrastructure development and proactive environmental consciousness.

More About the Report

FMI’s study offers an in-depth market forecast and analysis on the global sodium silicate market. Major categories encompassed by the report include application type (detergents, catalyst, pulp & paper, elastomers, food & healthcare, & others), across five regions (Asia Pacific, Europe, Middle East & Africa, Latin America and North America).

Contact Sales for Further Assistance in Purchasing this Report- https://www.futuremarketinsights.com/checkout/11173

Contact Us:                                                      

Future Market Insights
Unit No: AU-01-H Gold Tower (AU), Plot No: JLT-PH1-I3A,
Jumeirah Lakes Towers, Dubai,
United Arab Emirates
For Sales Enquiries: sales@futuremarketinsights.com
For Media Enquiries: press@futuremarketinsights.com
Website: https://www.futuremarketinsights.com

Future Market Insights (FMI), in its new report, estimates worldwide sales of walk-in coolers and freezers at US$ 8.6 billion in 2019. Widespread consumer acceptance of frozen and processed food, along with a steep rise in the demand for efficient refrigeration facilities to store and maintain the shelf life of these products, allude a brighter future for the walk-in coolers and freezers market.

Digitalization and smart technologies continue to influence numerous product developments and demand-side dynamics, and walk-in coolers and freezers are no exception. As consumers show marked preference for efficient yet custom-sized units, manufacturers are leveraging technological advancements to develop unique product features that fulfil specific customer requirements.

“Walk-in coolers and freezers are witnessing transformations under the influences of smart technologies and digitalization, and consumer preference for customized yet efficient equipment has led manufacturers to emphasize application-specific features in new product development”.

Request a Complete TOC of this Report with figures:
https://www.futuremarketinsights.com/toc/rep-gb-5155

According to the study, key players in the walk-in coolers and freezers market also remained focused on improving energy efficiency of their products, considering the continuous changes in energy conservation standards for various commercial and industrial equipment including walk-in coolers and freezers. These players are continuously putting efforts on improving quality of their offerings, while investing in innovative developments that would yield substantial improvements for customers.

Gains Remain High from Commercial Kitchens & Restaurants

Walk-in coolers and freezers continue to gain high traction from commercial kitchens and restaurants, which are widely used to preserve raw foods and grocery items. As international fast food chains and café outlets continue to explore opportunities in various attractive destinations, demand of walk-in coolers and freezers has been on an upward swing across the globe.

North America and Europe have been the early adopters of commercial kitchens and restaurants; however, they are reaching their saturation point. Walk-in cooler and freezer manufacturers are tapping into opportunities in developing countries in East Asia, where multi-cultural environment, changing eating habits, and rising disposable income have opened avenues of growth for commercial kitchens and restaurants. Moreover, walk-in coolers and freezers market in East Asia is likely to take over the Europe market in the future.

According to the study, newer trends and rapid expansion of retail food & beverage sector also represent a significant source of demand for walk-in coolers and freezers. Picture-perfect stores are gaining high preference among today’s consumers, especially millennials obsessed with social media platforms. Such factor has forced the manufacturers to innovate and enhance the visual appearance of their products without compromising on the operational functions.

Walk-in coolers and freezers with self-contained refrigeration continue to account for higher share as compared to remote condensing and multiplex condensing. Considering the suitability of self-contained refrigeration in almost any application along with ease of service and maintenance, this category also continues to witness higher innovation and investments.

According to the study, the walk-in coolers and freezers market shows a high level of fragmentation, and therefore, several market players are focusing on forging strategic alliance with other players to improve their market shares. Manufacturers are also focused on offering products that can be custom designed to fit any settings along with several add-on features to increase convenience and ease-of-use.

Ask us your Any Queries About this Report:
https://www.futuremarketinsights.com/askus/rep-gb-5155 

FMI’s research study also offers a long-term perspective and thorough analysis on opportunities present in the walk-in coolers and freezers market for the period between 2019 and 2029. As per the study, the global walk-in coolers and freezers market is projected to register a CAGR of 5.6% during the forecast period.

Walk-in Coolers and Freezers Market Key Segment

Product Type

• Walk-in Cooler
• Walk-in Freezer
• Combo (Freezer + Cooler)

Place of Use

• Indoor
• Outdoor

Technology

• Self-Contained
• Remote Condensing
• Multiplex Condensing

Door Type

• Hinged
• Power Sliding
• Manual Sliding

Application

• Cold Storage Warehouse
• Breweries
• Commercial Kitchen & Restaurants
• Floral Storage
• Pharmaceuticals
• Chemicals
• Research laboratories
• Hospitals & Mortuaries
• Mobile Refrigeration System
• Retail Food & Beverage
  • Supermarket
  • Hypermarket
  • Convenience Stores
• Other Stores

Sales Channel

• OEM
• Aftermarket

Mounting Type

• Floor
• Non-floor

Region

• North America
• Europe
• Latin America
• South Asia
• Oceania
• East Asia
• Middle East & Africa (MEA)

About Industrial Automation Division at Future Market Insights

The Industrial Automation & Equipment division at FMI adopts a novel approach and innovative perspective in analyzing the global machinery and industrial automation market. A range of FMI’s market research reports offer comprehensive coverage of capital, portable, process, construction, industrial, and special purpose machinery used across manufacturing sector. The team also conducts distinctive analysis about installed base, consumables, replacement, and USP-feature application matrix, making us a prominent voice of authority in the industry. We are associates of choice for established as well as budding industry

Router bits are used in several woodworking applications such as milling, drilling, grooving, profiling, engraving, carving, etc. High accuracy and precision of carbide-tipped router bits are giving them a competitive edge in the global market. High demand for design furniture is another plus point favoring market growth. Furthermore, high reselling value of carbide-tipped router bits as compared to high speed steel (HSS) is also expected to push the growth lever of the global market in the coming decade.

To remain ‘ahead’ of your competitors, request for a sample @
https://www.futuremarketinsights.com/reports/sample/rep-gb-11076

According to a new research report published by Future Market Insights (FMI), the global  woodworking router bits market  is estimated to exhibit a CAGR of close to 5% during the forecast period of 2019-2029.

Key Takeaways of Woodworking Router Bits Market Study

1. Woodworking router bits have prominent application in engraving and carving all kinds of wood such as chipboard, plywood, hardwood, and softwood, and play a crucial role in the furniture industry.
2. Targeting the expanding DIY consumer segment, manufacturers are offering customized products, which facilitate effective usage in handheld operations such as drilling, cutting, milling, etc.
3. The most common types of router bits available in the market are handheld router bits and CNC router bits. Handheld router bits are limited to specific applications, resulting in steady market growth, whereas, CNC router bits are versatile, providing lucrative business avenues for investors.
4. Out of all woodworking operations, grooving holds a significant share, and is projected to witness maximum growth during the forecast years.
5. In recent years, the market has witnessed price variations, owing to diversified product lines offered by manufacturers that target a broad clientele based on the type of woodworking operation.
6. Growing usage of wood in the design of basic utilities in commercial construction is expected to further raise the demand for woodworking router bits

For critical insights on this market, request to ask an expert here @
https://www.futuremarketinsights.com/ask-question/rep-gb-11076

“In the woodworking router bits market, products with high-end precision and durability are necessary for complex woodworking operations. Manufacturers are capitalizing on this trend by actively providing customized products for application-specific woodworking operations.”

Woodworking Router Bits Market: Competitive Landscape

The woodworking router bits market has become increasingly competitive as manufacturers are launching advanced products that offer various operational benefits and are compatible to the woodworking industry. There are a significant number of organized and unorganized players actively operating in the global market. Key players involved in the woodworking router bits market are Robert Bosch GmbH, Stanley Black and Decker, Kanefusa Corporation, Amana Tool Corporation, and CMT Utensili SpA, among others. The offering of versatile router bits can be a differentiating move for manufacturers in the global market.

Asia Pacific Offering Lucrative Opportunities for Market Growth

The woodworking router bits market is expected to gain significant traction in the coming years, owing to flourishing residential and commercial construction activities in developing economies of Asia Pacific. Rising demand from the furniture industry in the commercial and residential sectors is expected to drive the sales of router bits during the forecast period. Intense use of wooden furniture and timber for construction in countries such as India, China, and South Korea is expected to propel woodworking router bits market growth.

For More Information or Query or Customization Before Buying, Visit:
https://www.futuremarketinsights.com/customization-available/rep-gb-11076

More about the Report…

The research report provides thorough assessment and future forecasts of the woodworking router bits market on the basis of three primary segments listed as follows: operation, shank size, and tool type. The report provides comprehensive information about global market size, key market manufacturers, and regional perspective for the market. The report also provides important dynamics of the woodworking router bits market. Scope of the research includes handheld woodworking router bits with carbide.

According to FMI’s recent study, the global heat pumps market was valued at around US$ 32 Bn in 2019 and is estimated to expand at a CAGR of 5% over the forecast period of 2020-2030, with a limited impact of the current pandemic situation on long-term growth forecasts. Increasing demand for tech-advanced cooling solutions with low carbon footprint, government initiatives to curb greenhouse gas emissions, and advancements in heating, ventilation, and air conditioning (HVAC) systems are factors contributing to the revenue pool of the global heat pumps market.

Request a FREE Sample of this Report in PDF: https://www.futuremarketinsights.com/reports/sample/rep-gb-480

Amidst the global health crisis, cooling as well as heating systems are critical to fulfil the immediate needs of consumers, such as providing thermal comfort in hospitals and homes, preserving food and medicines, and keeping data centers running. In line with this, refrigeration and heat pumps are essential for consumers.

As the world attempts to fight the COVID-19 pandemic, it has led to delayed production across several heat pump production facilities in major coronavirus hit countries such as the US, China, and Germany, This is expected to dampen heat pump sales by around US$ 1 Bn in 2020. Moreover, the COVID-19 pandemic will significantly impact consumer behavior in the short term, with domestic shipments from China for air source heat pumps (ASHPs) registering drop of over one-third in January 2020.

The global heat pumps market will witness v-shaped recovery growth, owing to rising inclination towards innovative construction solutions, especially in countries such as India, China, and Mexico.

Key Takeaways from Heat Pumps Market Study

• Air-water heat pumps are finding immense use in domestic hot water, floor heating, and space heating/cooling applications.
• Heat pumps having flexible or twin-speed features to reduce energy consumption and improve overall efficiency throughout are likely to garner substantial traction over the forecast period.
• Demand for CO2 refrigerant heat pumps is expected to increase, given its excellent recyclability, low cost, and environment-friendly attributes.
• Hybrid heat pumps are likely to see significant rise in adoption, owing to their high efficiency, lower energy consumption, and cost effectiveness as compared to other heat pumps.
• Air-source heat pumps continue to grab huge attention of market players, owing to their low installation cost and high demand in North America and Western Europe.

Request a Complete TOC of this Report with figures: https://www.futuremarketinsights.com/toc/rep-gb-480

“As the world moves towards sustainable and green energy solutions, heat pumps are expected to replace conventional heating systems rapidly in the near term. In addition, the ongoing coronavirus (COVID-19) spread can alter how companies organize their supply chains in the coming years, with more stress being layed on decentralization”.

HEAT PUMPS MARKET TAXONOMY

The global heat pumps market is segmented into six segments in detail to cover every aspect of the market and present complete market intelligence to the readers.

Type

• Air-water Heat Pumps
• Air-air Heat Pumps
• Ground Source Heat Pumps
• Hybrid Heat Pumps

Power Source

• Electric
• Others (Gas Driven)

End User

• Residential
• Commercial
• Industrial

Refrigerants

• HFC
• CO2
• Ammonia
• Hydrocarbon
• Others

System Type

• Air-source Heat Pumps
• Ductless Mini-split Heat Pumps
• Geothermal Heat Pumps
• Absorption Heat Pumps

Region

• North America
• Latin America
• Western Europe
• Eastern Europe
• APEJ
• Japan
• MEA

Ask us your Any Queries About this Report: https://www.futuremarketinsights.com/askus/rep-gb-480

Heat Pumps Market: Competitive Landscape

The study provides vital insights of the competition landscape in the heat pumps market, along with various strategies adopted by prominent players. The global heat pumps market is fairly competitive, with manufacturers offering identical products. Some of the key manufactures in the heat pumps market are Panasonic Corporation, Mitsubishi Electric Corporation, Daikin Group, NIBE Group, and Danfoss Group Global.

Market participants are investing in R&D activities to develop new products with better energy efficiency, and are also focusing on providing aftersales services.

The customer experience platforms market revenue totaled ~US$ 7,753.9 Mn in 2021, according to Future Market Insights (FMI). The overall customer experience platforms market is projected to reach ~US$ 18,972.7 Mn by 2028, growing at a CAGR of 13.9% for 2022 – 28.

Buy Complete Report @ https://www.futuremarketinsights.com/checkout/7587