Beverage cans are common packaging format for alcoholic and non-alcoholic beverages, such as juices, carbonated soft drinks, energy drinks, and beer. The beverage can ends offers good barrier against sunlight and oxygen, thereby, retaining the quality of the beverage.
The global beverage can ends market is anticipated to grow due to some major factors such as rising need for metal cans and increasing consumption of energy drinks. The demand for beverage can ends is growing due to its various advantages such as high quality printing and higher mechanical strength along with possible decoration as compared with other packaging solutions.
Beverage can ends is a cost effective solution which is light in weight and small amount of metal is required in the manufacturing process. The beverage can ends are completely recyclable and it makes the aluminum a permanent resource that reinforces the circular economy, where manufacturing material can be used again with no loss in physical properties and quality.
The ready to consume health drinks are also a major factor in the growth of beverage can ends market. Earlier the beverage cans was opened by punching two triangular holes in the lid, it was also referred to as crunch key. Later advancement saw the beverage can ends made out of aluminum instead of steel.
Request Brochure@ https://www.futuremarketinsights.com/reports/brochure/rep-gb-6583
Pull tab beverage can ends are then invented as a convenient and easy to use packaging solution. Pull tab beverage can ends had a ring connected at the rivet for pulling, and which come off completely to be discarded. The pull tab beverage can ends were then replaced by most commonly used stay-on-tabs beverage can ends.
Beverage Can Ends Market – Regional Outlook
On the basis of geography, global beverage can ends market region is segmented into North America, Latin America, Asia-Pacific excluding Japan (APEJ), Eastern Europe, Western Europe, Middle East & Africa (MEA), and Japan. Among these regions, North America is expected to lead the global beverage can ends market due to increasing demand for ready to go health drinks.
Along with North America, Europe beverage can ends market is also anticipated to grow at a significant rate owing to their increasing applications in the re-packaging of carbonated drinks and health drinks. The Asia Pacific region is expected to witness an intense growth due to expansion of retail sector in the developing countries such as India and China.
Customization Before Buying, Visit@ https://www.futuremarketinsights.com/customization-available/rep-gb-6583
Beverage Can Ends Market – Key Players
Some of the key players operating in the global tray packing machine market are segmented into three tiers as tier 1, tier 2, and tier 3.
Tier 1:
- Amrcor Ltd.
- Sonoco Products Company
- Ball Corporation
- Ardagh Metal Packaging USA Inc.
- Crown Holdings, Inc.
- Silgan Holdings Inc
Tier 2:
- Helvetia Packaging
- Metal Packaging Europe
- Anheuser-Busch Packaging Group (ABPG)
Tier 3:
- Norsk Hydro ASA
- Mahmood Inc Ltd
- Scan Holdings
- Can Ends Packaging Limited
- National Factory for Can Ends Ltd.
- Royal Can Industries Co. Ltd.
Some of the major Chinese key players operating in global beverage can ends market are Shandong Sinopackmate Co., Ltd., Anhui Wonderful-Wall Color Coating Aluminium Science Technology Co., Ltd., Jinan Erjin Import & Export Co., Ltd., and Hangzhou Shield Trading Co., Ltd.
To Buy this Report Visit@ https://www.futuremarketinsights.com/checkout/rep-gb-6583
Beverage Can Ends Market – Key Developments
The global beverage can ends market is characterized by several new design level trends. Therefore, the competition is in terms of packaging optimization
- In April 2016, Ardagh Group S.A. acquired certain metal beverage can assets of Ball Corporation and Rexam PLC and support locations in Europe, Brazil, and the United States. This enhanced the production capacity of metal cans for Ardagh Group S.A.
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application, and industry.
Beverage Can Ends Market – Segmentation
The global beverage can ends market is segmented on the basis of product type, material type, size of the beverage can ends and by end use.
On the basis of product type, the global beverage can ends market is segmented as follows:
- Pull Tab Beverage Can Ends
- Stay-on-tab Beverage Can Ends
- Top End Beverage Can Ends
- Full Aperture Beverage Can Ends
On the basis of material type, the global beverage can ends market is segmented as follows:
- Aluminum
- Steel
- Tin
On the basis of size, the global beverage can ends market is segmented as follows:
- Up to 46 mm
- 46 to 52 mm
- 52 to 63 mm
- 63 to 65 mm
On the basis of end use, the global beverage can ends market is segmented as follows:
- Alcoholic
- Non-alcoholic
- Others
ABOUT FUTURE MARKET INSIGHTS, INC.
Future Market Insights, Inc. is an ESOMAR-certified business consulting & market research firm, a member of the Greater New York Chamber of Commerce and is headquartered in Delaware, USA. A recipient of Clutch Leaders Award 2022 on account of high client score (4.9/5), we have been collaborating with global enterprises in their business transformation journey and helping them deliver on their business ambitions. 80% of the largest Forbes 1000 enterprises are our clients. We serve global clients across all leading & niche market segments across all major industries.
Contact Us:
Future Market Insights Inc.
Christiana Corporate, 200 Continental Drive,
Suite 401, Newark, Delaware – 19713, USA
T: +1-845-579-5705
For Sales Enquiries: sales@futuremarketinsights.com
Browse Latest Market reports: https://www.futuremarketinsights.com/reports