Spark Plugs: Environment Awareness, Newer Materials May Influence Future Production

With the rising preference for materials such as iridium and platinum for preparing spark plugs which are compatible to newer engine models, the demand for spark plug is anticipated to grow at a rapid rate. The essentiality of spark plugs in the ignition system of combustion chambers in vehicles are expected to keep the requirements for spark plugs strong in the near future.

As per a recent study conducted by Future market Insights on the global spark plug market, the constant manufacturing of cars has resulted in a robust demand for spark plugs across the world. Moreover, car owners are often found to be using the same car for longer periods of time owing to technological advancements in the automobile industry, thereby causing a rise in the demand for replacement parts including spark plugs among others.

Iridium Spark Plugs Outpace Platinum Counterparts Owing to Costs

Currently, iridium spark plugs have been gaining adoption among most major vehicle manufacturers owing to its significant cost benefit in comparison to that of platinum. While iridium more rare to find, the price of the raw material is far more resistant to the volatility of the market, which makes it a preferred choice for spark plug manufacturers. Spark plug manufacturers are one of the primary consumers of iridium, on a global scale, with nearly one fifth of the world’s iridium production going towards spark plug production.

On the other hand, approximately half of all platinum is used to make catalytic converters, while one fifth is used for jewelry, leaving only limited supplies for spark plug production.

Coil on Plug Ignition Systems Boost Service Life of Spark Plugs

Conventional spark plug combinations usually are designed to share just one ignition coil. However, the design generates significant wear and tear of the platinum or iridium material in a relatively short period of time. However, with the introduction of coil-on-plug designs every spark plug in the vehicle is provided with a dedicated ignition coil, which allows the use of iridium or platinum with significant increase in the service life. Moreover, the system allows the driver to switch between spark plug brands, as suppliers sell spark plugs that are not specific to any particular make or model. This is anticipated to positively contribute to the growth of the sector.

Anti-Seize Materials Lose favor in Spark Plug Production

Spark plug producers are increasingly making use of plug shell plating in the place of conventional anti-seize materials. This measure prevents the cylinder head from sticking to the spark plug after long-term usage. On the other hand, anti-seize has been found to push past the spark plug’s threading, and disrupting the performance of the central electrode, thereby resulting in misfires, and damaging the threads, causing maintenance charges to go up considerably.

Material Innovations to Counter Environment Concerns

With growing environmental concerns automotive component manufacturers are focusing on the development and utilization of new materials for better performance, higher fuel efficiency, and considerably lower rates of emissions in an effort to control the impact of automobiles on global warming.

For example, Pilot Automotive’s patented Nitrode range of spark plugs has been aimed towards the development of innovative eco-friendly operations. The product offers users a unique yttrium coated bridge that improves efficiency of spark relay to the ground electrode. This increased extension of the spark produces considerably more energy, which results in noticeable ease in ignition.

In addition, Bosch has brought out an innovative Cup Connection technology, to meet the needs of newer engines that comprise fewer cylinders for increasing air pressure and efficiency. The new technology enables the generation of a higher ignition voltage and improved flashover resistance for the insulating material. The design makes use of a longer insulator, and makes use of a stud with a cup, which compensates for the extension.

Find actionable insights on the newest developments in the constantly changing global spark plugs market, here.

Low Profile Aortic Stent Graft Systems Gain Popularity with Increased Flexibility and Efficacy

The globally expanding base of elderly people and the rising incidences of aortic aneurysms are essential factors that are anticipated to propel the demand for aortic stents grafts in the near future. The possibility of being afflicted by the condition of abdominal aortic aneurysm (AAA) increases with the growth of the age. Consequently, the number of AAA cases is expected to increase with a growing aging population.

This is creating a greater demand for aortic stent grafts, which is a new treatment, which is rapidly being adopted as an efficient option for treating aneurysms. The procedure of endovascular repair involves the application of a stent graft, in an arterial blood vessel.

The treatment for aortic aneurysm can involve a wide variety of stent grafts. The grafts can vary depending on the design, deployment process, and the manufacturing material. Aortic stent grafts Find extensive application in endovascular repair procedures for abdominal or thoracic aortic aneurysms.

New EVAR Technology Enhances Stent Durability and Modifications

Since the introduction of the endovascular aneurysm repair (EVAR), efforts have been made continuously by manufacturers to improve on the design of aortic stent grafts. The EVAR procedure has grown in popularity owing to the reduced mortality and morbidity rates the procedure provides in comparison to that of open surgeries, allowing for greater intervention and conversion rates.

To find a solution to these limitations of current EVAR procedures, stent graft manufacturers have started to make use of low-profile delivery systems to enhance factors such as durability and functionality through modifications.

By using ultra-low-profile devices, the functionality of EVAR procedures can be boosted significantly through a wider range of arterial anatomic requirements that can be found, in addition to enhancing the device’s deliverability for a vast patient base.

The INCRAFT® System by Cordis Corporation is widely through to be an improved system for referrals in regards to the EVAR technology, instead of being used as device only for bailout procedures while operating in challenging surgical procedures. The addition of this device profile is vital in terms of extra value for any patient who may be suffering from AAA.

Moreover, the EVAR procedure involving the INCRAFT system allows healthcare professionals to consider using only local anesthesia during the operation, and providing an early release to the patient from the hospital.

Researchers are conducting clinical trials to test the benefits of using pre-cutaneous access in comparison to open exposure to the femoral area.

Non-Invasive and Minimally Invasive Surgery Drive Production

As per a recent study conducted by Future Market Insights on the global aortic stent grafts market, the worldwide demand for aortic stent grafts is rising rapidly largely owing to the growing incidences of aortic aneurysms. Growing use of endovascular repairing procedures in completing open surgeries and higher rates of life expectancy, owing to better healthcare facilities are anticipated to create a favorable environment for the production of aortic stent grafts.

In addition, various insurance companies are setting up reimbursement policies that are encouraging the use of minimally invasive surgeries, and consequently the use of aortic stent grafts as well. Growing efforts by researchers for conducting clinical trials to gain the approval of the FDA for new innovations in the designs of aortic stent grafts, to meet the anatomical needs of an ailing body are likely to increase treatment options for aneurysm patients. Moreover, efforts towards business collaboration for improved R&D, are also expected to increase the demand for aortic stent grafts.

On the other hand, a shortage of healthcare professionals with the requisite training, design defects leading to product recalls, lack of awareness about the new endovascular aneurysm repair (EVAR) treatment options and health complications associated to stent grafts are key factors that are expected to hinder the market growth.

Find actionable insights on the newest developments of the constantly evolving global aortic stent grafts market, here.

Automotive Manufacturers Spot Potential in Middle East, North Africa; Commercial Vehicles to Witness Robust Demand

Commercial vehicles are finding extensive utilization in logistics and transport application, across the globe. Along with the surging growth in the global commercial vehicles business, the Middle East and North Africa (MENA) region has also showcased an effective potential for the commercial vehicle manufacturers. The growth exhibited by the construction sector and the advancements in transport and logistics application sectors act as major contributing factors for the demand growth of commercial vehicles in MENA countries.

Car Manufacturers Mulling over the Potential in MENA with New Developments

The automotive sector has reflected burgeoning growth in the MENA region over the past couple of years. Automotive manufacturers are eyeing on the extensive opportunities offered by the region to further strengthen their global footprint and gain profitability on the back of the exceeding demand for commercial vehicles.

The German automotive giant, Mercedes-Benz, for instance, showcased similar attraction towards the MENA region. In 2018, the company took its existing fleet of commercial vehicles including the premium heavy-duty trucks to Middle East and Africa. The new Mercedes-Benz Actros and Arocs are designed to offer next-gen reliability and efficiency for distribution and long distance freight. These trucks are robust and completely reliable for off-road and construction applications, making them ideal for the ever-growing construction sector in the Middle East and Africa. Moreover, the trucks are specifically developed for the MENA region, built to withstand harsh operating conditions.

There are several strategic developments made across the region for boosting the production of commercial vehicles. The North African market has witnessed similar collaborations that are expected to further fuel the production of commercial vehicles. For instance, the South Korean automaker, Hyundai Motor Company entered into a joint venture partnership with Algeria’s Global Group for manufacturing commercial vehicles in North Africa, by setting up a complete knockdown (CKD) unit assembly plant.

Tata Motors, a leading provider of commercial vehicles in India is engaging in robust exports of commercial vehicles as it is witnessing substantial demand for commercial vehicles such as buses and trucks from the regions including the Middle East, SAARC, Africa, and South East Asia where it ships its commercial vehicles.

Emission Standards to Redefine Automotive Fleet in MENA Region

The region has witnessed tremendous developments in terms of adopting a more sustainable approach in the automotive domain. The countries in the Middle Eastern region are increasingly promoting environment-friendly, cost-efficient, and fuel-efficient, vehicles which are expected to bring major transformations in the automotive sector, thereby influencing the commercial vehicles domain. The governments are making efforts to incorporate green vehicle units, especially into the public transport fleet. The UAE’s Emirates Authority for Standardization and Metrology (ESMA) mandated a Euro 4 regulation, from 2018 to encourage utilization of sustainable vehicles in UAE.

Commercial vehicles manufacturers are introducing commercial vehicles in compliance with these regulations. For instance, a UAE distributor of Volvo Trucks, Al-Futtaim Auto & Machinery Company (Famco), went further of the Euro 4 regulations and launched the Volvo Trucks that are built in compliance with the Euro 5 emission standards, which supports the UAE Government’s Vision 2021, for providing safer environment and contribute to a sustainable future.

Substantial Demand Witnessed for Heavy-duty Commercial Vehicles in MENA

The heavy duty type of commercial vehicles is creating tremendous demand in the region, owing to its increasing application. Companies are reaping the profitability associated with heavy-duty commercial vehicles by expanding their commercial vehicle portfolio. For instance, a Japanese manufacturing trucks and buses, UD Trucks, with an aim to expand its heavy-duty truck segment, added a new commercial vehicles variant, the new heavy-duty Quester. Designed to address the variations demanded in the Middle East, these new heavy-duty commercial vehicles are built to withstand harsh driving conditions. Furthermore, the company aims to leverage the overwhelming demand for commercial vehicles such as heavy-duty trucks backed by the propelling infrastructure and stimulating construction sector, with these new offerings.

Electric Vehicles Trend to Influence the Commercial Vehicles Landscape

Demand for electric vehicles has been multiplying across the globe over time. This increasing demand has greatly influenced the commercial vehicles landscape, where commercial vehicles manufacturers are focused on achieving greater efficiency by innovating in electrified commercial vehicles. Companies are making for making effective progress in manufacturing electric commercial vehicles. For instance, giant automotive companies and commercial vehicle manufacturers are bullish over the opportunities sighted in MENA region for the commercial vehicles business.

Readers can further analyze the MENA commercial vehicles landscape by referring to the key findings and exclusive insights that uncover the opportunities traced in the MENA region in a comprehensive research study.

Electric Boats: Eco-friendly, Electric Variants to Gain Major Market Share in 2019

The global shift towards sustainable automotive alternatives is triggered several innovations in numerous sectors. The bolstering ‘green’ initiatives are further fueling the demand for electrified automotive fleet. Electric boats are amongst such green automotive alternatives gaining traction in the boating industry and are capturing popularity over time. Manufacturers are witnessing a surging demand for electric boats from commercial operators across the globe, requesting a range of applications for electric boats that are yet to be anticipated by producers of electric boats. Owing to this, they are ramping up production of electric boats to supply this demand growth. Conventional boat manufacturers are also focusing on the production of electric boats to reduce the carbon footprint and cater to the changing consumer preferences.

Innovative Electric Boats to Replace Conventional Boats on a Large-Scale

The electric boats are being greatly preferred by end-users over the conventional diesel and gasoline powered boats that are contributing to the rising pollution. Eco-friendly electric boats address the needs for alternative energy powered boats, hence, attracting a large consumer base. Various manufacturers are launching new and advanced electric boats that cater to various needs.

For instance, Templar Marine Group Ltd. launched its first plug-in electric boat for the North American market. This electric boat, called the Templar Cruiser 26 is specially designed for the pleasure craft market in the region. Claimed to be one of the largest electric boats for recreational purpose, this electric boat is completely electric and eco-friendly having features such minimal noise and maintenance, and the boat is ideal for year-round boating. Moreover, the innovative design and absence of fuel tank and the internal combustion engines, make it a very lightweight electric boat.

Apart from the recreational application areas, other electric boat producers are also witnessing demand for electric boats from other potential avenues. Manufacturers are extending the capabilities of electric boats by producing application-specific electric boats for this purpose. The pump-out boats that pull up to other boats to empty their waste tank into its holding tank and unload the waste into sewer lines are also being innovated. Connecticut witnessed the launch of a revolutionary electric boat, the electric pump-out boat, which is the claimed to the only one-of-its-kind. Equipped with Torqeedo electric engines powered by the solar panels on its console, this first-ever electric pump-out boat will be used to pump sewage from Branford River and Branford Harbor boats. Such electric boats embrace the idea of clean air and water, energy efficiency, innovative application of technology and a healthier marine manufacturing economy.

Indonesian eco-friendly resorts are also eyeing on launching electric boats as a crucial contribution to protect the bio-diverse ecosystem underwater. For instance, the new eco dive resort in Raja Ampat, electrified its dive boats with the launch of the electric boat. Although not completely eco-friendly, the resort plans to work on charging the boats with the help of solar energy, which they are conventionally using to power most of the resort.

Solar-Powered Hybrid boats to Gain Major Consumer Attraction

Hybrid boats are powered by solar energy, owing to which they are emerging as a popular alternative on account of the zero-emission attributes of these boats. Moreover, the hybrid boats are also being preferred for being lightweight owing to the deployment of solar panels. Apart from these features, enhancements such as noise reductions are also boosting the demand for these type of electric boats. Revolutionary technologies such as the new Hybrid boating technology by Volva, which would allow boats to be operated with both electric power as well as diesel in parallel that would be available commercially in 2021, are expected to boost several developments in the boating industry.

Solar powered boats are gaining major significance across the globe. For instance, a solar-powered boat was demonstrated in India’s Dal Lake, which was designed by a team of students and can run after being charged through solar energy. The government further looks forward to implementing solar-powered electric boats for the purpose of reducing pollution.

The burgeoning demand for sustainable transport has been a key growth driver for the overall electric boats landscape. The detailed electric boats landscape study offers a detailed overview of the electric boats market.

Food Manufacturers Bullish on Investing in Phycocyanin-Powdered Products in 2019

Increasing number of joint ventures in phycocyanin market is expected to provide a better and fully developed phycocyanin, thereby introducing new ingredients in the global market. Healthy growth of phycocyanin market is anticipated for 2019 with rapid surge in demand for the natural products from across the globe. Nowadays, growing inclination of consumers towards the natural products is witnessed, on account of rising awareness regarding harmful effects of the synthetic compounds. This in turn has resulted in extensive research on the microalgae, as major source of natural pigments, thereby fuelling growth of phycocyanin market worldwide.

Launch of New Product with Phycocyanin Extracts to Enhance Milk Production

A Turkish biotechnology institute recently launched MilkBoost-19, a nanotechnologic (herbal and natural) spray for increasing milk production. This product is formed with nanocapsulated extracts of phycocyanin, astaxanthin, ocimum sanctum, alchemilla, trigonella foenum-graecum, cuminum cyminum and Actaea racemosa L. It helps in provoking the oxytocin hormone, thereby stimulating nasal nerves, resulting in increased prolactin benefitting in higher milk production. Most of all, the product also helps in enhancing the quality and fat content in milk, thereby reducing the required feed amount.

Re-Launch of Spirulina-Fortified Water to Enhance Offerings Based on Phycocyanin

A French startup invested heavily in R&D and now is re-launching its Spirulina-fortified water with improved stability and taste of that is extremely temperature sensitive and most of all, any change in desired environmental conditions could destroy the entire phycocyanin-based product. Springwave is highly beneficial for the customers as it offers higher content of minerals, vitamins and phycocyanin, thereby making it an exclusive antioxidant-rich drinking water, holding immense revitalizing properties as well.

New Clinical Trial Reveals Phycocyanin Benefitting Obese Individuals

A new clinical trial in Mexico recently revealed, growing consumption of arthrospira maxima along with systematic physical exercise significantly benefitting in greater weight loss, thereby reducing time for reaching fatigue as well as onset of the lactate development in blood. Dietary supplements formulated with algae (Spirulina) is likely to witness growing consumption in US with surging demand for juices, energy bars and smoothies. Wide-ranging variety of phytonutrients such as phycocyanin that are rich in protein content are gaining significant traction amongst the obese individuals since the recent past.

Development of Phycocyanin Powder in Canada to Enhance Nutritional Benefits

Booster Juice Ltd., manufacturer of smoothies and fresh juice in Canada recently introduced phycocyanin powder in its product portfolio of innovative and advanced health food products. The company has taken immense efforts in blending smoothies with phycocyanin powder, benefitting its customer-base with anti-inflammatory properties and nutritional benefits including Vitamin B and most of all, is appealing to the vegans and vegetarians who lack nutrients in their diets. This initiative is also a part of food trend in North America that is fast gaining grounds in the plant-based source products.

New Research Finds Phycocyanin Inspiring Modern Solar Technology

Scientists recently took a deep-dive on proteins and discovered a well-known protein, phycocyanin being highly responsible for accumulating solar energy in the cyanobacteria, thereby holding significant for oxygen production as well. This ability of phycocyanin can further help in developing cutting-edge and smart solar technologies that can cater to the challenges faced by existing solar technologies regarding adapting to the fluctuating climatic conditions. This research holds possibilities for the solar devices that can convert solar energy with higher efficiency such as the flexible, smart and bio-inspired solar panels might not need regular cleaning and perfect sunny weather for attaining higher efficiency.

Joint Ventures in U.S. to Stimulate Production of Phycocyanin

Production cost of Spirulina microalgae, parent product of phycocyanin is very economical in U.S. However, phycocyanin pigments are likely to find growing applications in cosmetics, pharmaceuticals, nutraceuticals, food supplements as well as dietary supplements including milk shakes, sweet cake decoration, desserts, alcoholic drinks, chewing gum, soft drinks, ice-creams and fermented milk products. Dietary supplements manufacturing companies in the U.S. are taking immense efforts in entering into joint ventures for enhancing their capabilities and to develop synergistic partnership. For example, recently Valensa International, manufacturer of dietary ingredients based in Florida with EID Parry, its parent company have announced a new JV (joint venture) with Synthite Industries Ltd., oleoresin extraction business in India. This JV is inclusive of Million dollar investment for developing a new plant, in order to extract Parry Organic Spirulina for producing phycocyanin that Valensa would be developing for medical foods, functional foods and dietary supplements.

To avail more information regarding the developments and researches in phycocyanin market, click here.

Shocking Orthopaedic Prosthetics Application Discovery Takes India by Storm

Vast advances in Computer-Aided Design (CAD) technology as well as material science have stimulated growth and development in orthopaedic prosthetics market. Manufacturers of orthopaedic prosthetics are planning to take 3D-printing to a whole new level by catering to the needs of end-users for daily wear, sports and even models, which can fit in high heels. Advancements in materials and technology have enabled prostheses towards better mimic human form as well as function compared to earlier times. In addition, improvements are made in the sockets as well, with the help of computer-aided fabrication methods, in a bid to improve comfort level and fit for the patient.

3D-Printed Orthopaedic Prosthetics to Revolutionize Knee Surgery

Growing emphasis on the physical sports, increasing number of road accidents and rising demand for replacement of the older orthopaedic prosthetics with durable and lighter materials is likely to compliment the need for customized and 3-D printed orthopaedic prosthetics. In addition, increasing availability of orthopaedic prosthetics that provide enhanced functionality and customization is expected to stimulate demand for orthopaedic prosthetics in the developed markets. For example,

A double amputee and wheelchair-bound Emirati recently benefitted with 3D-printed transtibial orthopaedic prosthetics, first in UAE. The person survived on wooden orthopaedic prosthetics (legs) for more than 15years and now is extremely benefitted with customized orange 3D orthopaedic prosthetics. The all-new 3D-printed orthopaedic prosthetics offers enhanced functionality, comfort levels and stability.

New 3D-printed orthopaedic prosthetics programs are likely to hold potential for improving lives of millions of patients suffering from knee problems. Some organizations in France are taking immense efforts in developing advanced orthopaedic prosthetics knee joints with the help of 3D printing technology, thereby catering to the demand for innovative artificial knee joint designs with development of new approach for production of orthopaedic prosthetics.

Increasing number of baby boomers are expected to drive growth and development of orthopaedic prosthetics in 2019. As in West Africa, a child is benefitted with 3D-printed orthopaedic prosthetics (brace) for right leg that was paralyzed due to a car accident. 3D-printed orthopaedic prosthetics has benefitted the child with fast-track and customization, thereby compensating for paralysis issue. Developing countries where demand is high but social safety net is smaller, these 3D printed orthopaedic prosthetics will witness traction in 2019.

Orthopaedic Prosthetics to Benefit Wild Animals and Birds

Surging number of cases related to chronic conditions and orthopedic injuries resulting in the bone-related deformities stimulates demand for orthopedic prosthetics. Recently, wild animal such as tiger and a bird (hawk) were benefitted with orthopaedic prosthetics, offering them a new life all-together. For example,

An international team of surgeons and veterinary doctors have brought orthopaedic prosthetics usage to a whole new level by developing an artificial paw for an Indian tiger for the very first time. The animal needs orthopaedic prosthetics for its front left paw and requires amputation of swollen bones or nerves for pain relief. Orthopaedic prosthetics will be implanted on the amputed limb in the initial stage of treatment followed by 3D printing design of left limb.

Apart from this, recently a hawk received orthopaedic prosthetics bone anchor that now helps the bird with full grip, thereby enabling its talon in lifting anything.

Enhanced Orthopaedic Prosthetics Design to Eliminate Existing Wear and Tear Challenges

Since the recent past, orthopedic prosthetics market has witnessed notable developments in the production and designing technologies. The new products hold an enhanced level of usability and comfort with growing resistance to tear and wear of the products. Recently, for knee and hip replacements, new prosthesis designs were developed by a new manufacturing cell. Polymotion Hip Resurfacing is the new concept that is likely to cater to the growing challenges faced based on product performance, thereby causing patients with significant issues. The approach to hip resurfacing is expected to provide significant benefits to the surgeons as well as patients that are likely to receive implants at relatively young age. The new R&D cell identified highly cross-linked polyethylene along with porous coating, delivering ideal characteristics for usage in hip resurfacings.

Innovative 3D-Printed Orthopaedic Prosthetics Launched with Medical Certification

A robotics company lately launched world’s first ever medically certified 3D-printed artificial arms beneficial for amputees. The wearable orthopaedic prosthetics is likely to cater to the needs of pediatric landscape, thereby enabling every age of patients benefitting from the custom-fit orthopaedic prosthetic arms. Expandable and compressible sockets in the innovative orthopaedic prosthetics helps in delivering comfortable fit in the varying environmental conditions.

For more information on the exclusive developments and innovations in orthopaedic prosthetics market, click here.

Automotive Repair and Maintenance Services: Robotic Bugs and Snakes at Your Service Now!

Evolving attitude of average customers towards vehicular safety along with increasing reliance on the road transportation for plethora of activities are taken up as the two lucrative and powerful enablers of automotive repair and maintenance services market growth. Apart from this, rapidly increasing sales of used cars across several developing regions helps in further stimulating demand for automotive repair and maintenance services.

Development of New Robot Bugs and Snakes Enhancing Automotive Repair and Maintenance Services

Ripping apart engines of road vehicles and planes for diagnosing and fixing issues is expected to be a time-consuming and expensive procedure. In a bid to cater to such issues, a luxury automaker and engineering company has developed an innovative idea for dealing with hard-to-reach places with the help of insect and snake-inspired robotics. In addition, robotics are expected to pave ways for revolution in automotive repair and maintenance services, especially with regards to engines. The pair of snakes are flexible enough for travelling through the engines, in order to fix patch repairs to the dented thermal barrier coatings. With the help of these robotics, even the critical vehicle parts can be repaired, thereby causing no further damage to the vehicle.

Apart from this, the luxury automotive repair and maintenance services market player has developed miniature robots benefitting in plane maintenance, inspired by the insect swarms. Most of all, the insect robotics consist of tiny cameras that delivers visual feeds in real-time for operators. The miniature robots also helps in minimizing the costs and time related to removal of aircraft engines.

Over-The-Air Updates to Take a Major Leap in Automotive Repair and Maintenance Services

On a broader perspective, some trending opportunities in automotive repair and maintenance services market are

  • Collaborations between the small and locally owned leasing firms as well as repair shops.
  • Growing inclination towards the adoption of remote vehicle diagnostics system

However, locally owned repair shops have been strategically focusing on attaining huge repair and maintenance contracts with the insurance firms, fleet owners and leasing firms, in order to expand their market share as well as profits. Increased reliability is offered by means of remote diagnostics system and on-call assistance. For example, automakers are taking immense efforts in rolling out automotive repair and maintenance services for remotely fixing faulty vehicles. Some of the leading automotive repair and maintenance services market players are planning to develop models by 2020 that would enable OTA (Over-The-Air) updates, thereby upgrading the vehicle with all-new features as well as remotely fixes faulty vehicle software. Companies such as Tesla are contributing significantly towards upgradation of vehicles by availing remote diagnostics system. Hassle-free and time saving procedures are the benefits end-users can reap with the OTA repair and maintenance services.

Online Platforms to Beef Up Automotive Repair and Maintenance Services

Beepbeep.ph, online hassle-free automotive repair and maintenance services app is targeted towards motorists, helping them in addressing all the requirements of their vehicle in the most time-saving and effective way. The online hassle-free automotive repair and maintenance services app offers preventive maintenance services as the end-user just has to look for preferred car shop in the app, book appointment and the company drivers will thereafter take care of the pick-up and drop back services. Most of all, this innovative app offers customer convenience, thereby bringing reliance and quality-of-work to the customers.

Artificial Intelligence to Enhance Automotive Repair and Maintenance Services

Development of artificial intelligence based automotive repair and maintenance services is likely to benefit Openbay Company running online services for automotive repair and maintenance services. Openbay.com is striving for enhancing interactions of consumers across the messaging and mobile apps, social platforms and websites, which drives the need for predictive analytics, machine learning and natural-language processing. The company further will be expanding its offerings globally, with the help of heavy funding.

In order to acquire further insights on development and how online platforms are trending in automotive repair and maintenance services market, click here.

Advanced Automated Guided Vehicles Could Define Material Handling Processes Future

The modern warehouses and industries demand next-gen material handling equipment and solutions that not only help in reducing labor cost but also help in achieving environmental efficiency. This is why the automated guided vehicle is becoming an ideal choice for industrial sectors. A conventional automated guided vehicle is being redesigned to address the transforming requirements, backed by technological advancements. A modern automated guided vehicle is, therefore, expected to offer improved scalability, reliability, and high performance.

Utilizing Green Energy to Power Next-gen Automated Guided Vehicle

Leading industries and production facilities are opting for green technology to foster their goal of achieving environmental efficiency by reducing environmental footprint. The choice of industrial equipment and machinery for modern plants and sites is heavily relying on the green energy factor. Konecranes Gottwald, a recognized provider of mobile harbor cranes and automated guided vehicle recently supplied 25 units of a lithium-ion battery powered automated guided vehicle to Hamburger Hafen und Logistik AG (HHLA) Container Terminal Altenwerder (CTA), replacing CTA’s existing first-generation automated guided vehicle which was powered by diesel. These automated guided vehicles are unmanned and controlled through software, providing efficiency between the stack yard and harbor quay in large container terminals. The lithium-ion technology enables faster charging and the use of green energy helps in transporting containers between a yard and the ships without the emission of harmful gases, thereby boosting sustainability at the workplace.

Aluminum Production Industry to Benefit from the New Product

Mobile and stationary equipment manufacturer, Mecfor introduced one of its most innovative products, an automated guided vehicle designed wholly designed to cater to the aluminum production industry across the world. Designed to facilitate in complex environments, this new automated guided vehicle overrides challenges such as temperature variation, dust, magnetic fields, and continual worker interactions. Mecfor was able to position itself for next-gen aluminum refineries with this technological investment and open new opportunities for the development of similar equipment. Moreover, this all-new cutting-edge automated guided vehicle would also reduce the ecological footprints of production plants.

Application-Specific Requirements to Fuel Innovations

The demand for application-specific equipment and machines are driving robust innovations in the automated guided vehicle landscape. The demand for unmanned guided vehicle systems is expected to reflect a significant demand specifically from the freezer storage warehouses. Finding workers to function in the freezer and chilled environments have been challenging. Such situations are triggering new innovations in the automated guided vehicle ecosystem. Owing to this, a provider of integrated automated technology, services, and software, Dematic released a new freezer-rated narrow aisle reach automated guided vehicle system, which is designed for operating autonomously in freezer and chilling environments. While the manually operated automated guided vehicle systems witnessed workers taking breaks due to the freezing conditions, this new automated guided vehicle can operate constantly for transporting products in cold conditions.

Boosting the Competence of Automated Guided Vehicle with New Investments

The automated guided vehicle landscape has witnessed several developments in terms of bolstering investments, portfolio expansions, and others that are aimed at enhancing the capabilities of automated guided vehicles. For instance, the SSI SCHAEFER, a leading provider of products for the material handling products, expanded its product portfolio in the futuristic segment with an investment in DS AUTOMOTION, an automotive guided vehicle specialist. This collaboration was aimed at meeting the burgeoning demand for the automated guided vehicle. This investment would support the SSI SCHAEFER’s expansion of their automated guided vehicle portfolio and further increase their market coverage. Furthermore, the company aims to boost their focus on handling specific tasks of transporting and lifting with the automated guided vehicle systems by combining their intralogistics solutions expertise with DS AUTOMOTION’s customized device configurations expertise.

Automated Guided Vehicle with Laser Technology Integration Facilitate Precision

Laser technology remains a crucial driver for the automated guided vehicle landscape. The laser guidance enabled automated guided vehicle solutions deliver high-level precision as they successfully detect fixed reference points and offer flexible and dynamic control. Manufacturers are aiming at offering laser integrated automated guided vehicle to offer their clients with next-level handling solutions.

There are several opportunities anticipated across the automated guided vehicle market for manufacturers. To avail an insightful overview of the other such developments in the automated guided vehicle market, click here.

Beverages Manufacturers Upping their Sustainability Quotient with PET Preforms

PET is frequently utilized for packaging a wide range of products that include peanut butter, beverages, frozen foods, bakery goods, cosmetics, and others. Valued for a number of attributes including lightweight, robustness, thermo-stability, cost-effectiveness, transparency, shatter-resistance and recyclability, PET is a superior choice for the packaging sector. PET preforms, prepared by PET material are being used for producing PET products and can be molded in the desired shape. PET preforms are gaining popularity as they transform the process of PET manufacturing and offer substantial benefits including flexibility, environmental efficiency, operational efficiency, and cost.

The beverage sector is expected to create major demand for PET preforms. Manufacturers of PET preforms are witnessing majority demand growth for PET preforms owing to the continual consumption of bottled beverages in the developing as well as developed economies. Moreover, the PET preforms landscape is also expected to be highly influenced by the technological developments that are expected to facilitate better production.

Minimizing Carbon Footprint Remains Crucial Sustainability Goal

While the production of PET preforms rises, the increasing environmental issues associated with PET production, that increases the emission of carbon have triggered alarming concerns across the manufacturers. Owing to these, the PET preforms manufacturers are making efforts to reduce the overall carbon footprint. In line with these efforts, the rPlanet Earth, a green tech company launched a new plant in California for making PET preforms for their application in the beverage industry along with thermoforms for ready-to-eat foods. As rPlanet Earth focus on reducing the carbon footprint, they aim at minimizing the intermediate transportation steps that create greenhouse gas emissions. By taking the process from materials to PET preforms and thermoforms under one roof, the company is able to reduce the overall carbon footprint. Similar efforts were taken by Suntory Holdings, a leading beverage company, who introduced a new technology for the production of PET preforms for soft drink bottles. The new technology is claimed to reduce carbon emission by nearly 25 percent.

PET recycling Trending

PET has been a popular choice in the packaging sector owing to its attributes, one of which is the highly recyclable property. The PET recycling trend is gaining major significance over time. Manufacturers are utilizing completely recycled PET for the production of PET preforms as they boost environmental sustainability and minimize greenhouse gas emissions. This has given rise to increasing investments in the recycling space. Leading companies operating in the PET preforms landscape are also focusing on this trend. The globally recognized plastics manufacturer, ALPLA-Werke Alwin Lehner GmbH & Co KG, in collaboration with Texplast, have bolstered PET recycling with the new extrusion facility at a Germany-based Texplast site, with an aim to increase the recycling capacity for food-safe PET regranulate. Texplast would recycle returnable goods attained from the food retail sector, transforming them into food-safe and high-quality granulate that Alpla would use to produce PET preforms for PET beverage bottles.

PET Preform Demand Grows and So does Production Capacities

Krones AG, a provider of blow molding and packaging machines acquired the injecting molding tools and services specialist, MHT Holding Ag, with an aim to reinforce its PET offerings. The acquisition enables Krones to provide tools for manufacturing PET preforms, thereby filling the gaps in its value chain. The increasing demand for PET preforms has been triggering various developments in the landscape. Companies are strengthening their PET portfolio with the help of acquisition strategies.

PET preforms manufacturers focus at continual production expansions owing to the increasing consumer demand. To know more about various other developments and strategies laid by leading PET preforms providers, click here.

Boosting Engine and Fuel Efficiency with Next-gen Automotive Turbochargers

With the vast advancements reflected by the automotive sector, high-level efficiency and productivity in the automotive application are far more achievable. As the automotive turbochargers help in increasing the power output of the automotive engines by enabling increased air intake to the powertrain’s combustion chamber, automotive turbochargers are gaining major significance over time. Furthermore, automotive turbochargers are both efficient and eco-friendly owing to their capability of increasing engine power without the increase in piston displacement. In addition, the companies operating in the automotive turbochargers landscape are focusing on achieving greater fuel economy, emission control, and downsizing of automotive engines.

Compliance to Stringent Emission Laws to Remain a Crucial Factor

The stringent regulations pertaining to the emission of gases levied on automotive vehicles have been augmenting the growth of the automotive turbochargers landscape. The substantial transformations in regulatory laws in developed nations are expected to influence future developments in the automotive turbochargers landscape. The California Air Resources Board (CARB), the emission regulator in both aftermarket and OEM avenues, issued an Executive Order that stated the turbocharging of all forms on gasoline engines will be considered as non-compliant to the stringent emission laws of the state. These orders that will be coming in effect from April 1, 2019, are not just applicable for aftermarket automotive turbochargers but also OEM automotive turbochargers. With the evolutions reflected by modern automotive turbochargers owing to the technological advancements, the OEM and aftermarket automotive turbochargers would now be able to make compliance with these emission regulations, while not compromising on producing immense power and boosting the driving experience.

New Automotive Turbochargers Exhibit Quick Response Time

There is an increasing deployment of automotive turbochargers in the gasoline engines, which has created major demand for the product. Furthermore, the proliferating technological developments with respect to boosting the engine performance have given rise to new innovations. BorgWarner, an automotive component manufacturer, backed with its expertise in engine boosting technology, developed a dual volute turbocharger that is well-designed to deliver quick-response time for light-duty vehicles that require exceptional transient behavior.

While this new addition to the automotive turbochargers portfolio of BorgWarner is expected to help the company expand its future capabilities, the company has also introduced the new EFR Series automotive turbochargers that are designed to address the high-power needs and recognized for its performance and reliability, owing to the combination of enhanced technologies. The company has reflected a major focus on enhancing its capabilities of these automotive turbochargers to cater to the ever-growing automotive landscape.

Manufacturers Aim at Addressing Improved Efficiency Requirements

Manufacturers of automotive turbochargers are focused on addressing the demand for fuel and engine efficiency created by the automotive domain. On account of this, leading companies producing automotive turbochargers are bringing new innovations. Cummins Turbo Technologies, a company focused on producing medium to heavy-duty diesel engine automotive turbochargers, has brought effective innovations to boost the efficiency and performance of the commercial heavy-duty wastegate turbochargers. The company has utilized a revolutionary approach that has resulted in the enhancing the efficiency of automotive turbochargers to about 6 percent and the fuel efficiency to 1.5 percent. While innovating on the offerings of automotive turbochargers, the company aimed several developments on the turbocharger turbine, including mixed flow turbocharger, improvements on the compressors, and the turbocharger diffuser.

Apart from staying in compliance with the regulatory norms, the manufacturers of automotive turbochargers also aim at leveraging the opportunities slated by the automotive turbochargers landscape. To know more about the strategic developments carried out by leading providers, click here.