Growing Interest in Recreational Motorcycling Creates Notable Demand for Specialized Chain Sprockets

The production and sales of motorcycles has witnessed a significant rise in recent years, especially in emerging economies owing to their enhanced level of fuel efficiency in comparison to four wheelers and constant rises in the global prices of fuel. Moreover, the overall cost of natural gas has nearly doubled in the past five years, which is expected to contribute positively towards the growth of motorcycle chain sprocket manufacturers in the near future. In addition, the rising prices of fuel has encouraged consumers to choose two wheelers over four wheelers, largely owing to the poor fuel efficiency of the most four wheelers, which is generating a higher demand for motorcycles, and consequently for motorcycle chain sprockets as well.

Moreover, rising incidences of traffic jams urbanized areas is also expected to noticeably boost the demand for motorcycles, and chain sprockets, owing to increased maneuverability and fuel savings. This has increased the global ration of motorcycles to cars, thereby creating improved prospects for manufacturers in the years to come.

Poor Road Infrastructure Boost Aftermarket Servicing Demands

Another major factor that can greatly impact the motorcycle chain sprocket producers is road transport. The replacement or life duration of these automotive components relies heavily road conditions. While motorcycle chain sprockets can last for around five years, with regular servicing and oiling while operating on smooth roads, the total lifespan significantly drops on rough roads, or impact of potholes, which even adds to the requirements of maintenance activities. Owing to this, the aftermarket demand for servicing for motorcycle chain sprockets is expected to rise in developing countries, where road transport infrastructure is irregularly developed.

On the other hand, growing awareness about environmental concerns is also hindering the growth of the motorcycle chain sprocket market. The rising level of emissions and the resultant air pollution from conventional automobiles are strongly fuelling the growth of electric vehicles. Numerous governments across the world are promoting the purchase of electric two wheelers, which can reduce the number of conventional motorcycles and consequently the requirement for motorcycle chain sprockets. This is particularly true in emerging economies such as Thailand, Indonesia, China, and the Philippines, where the use of two wheelers is very common, in comparison to that of developed countries such as the European Union, or the United States.

Recreation Activities to Increase Sales of Motorcycle Chain Sprockets

While, the use of motorcycles has been low in developed countries until recent times, the rising interest in motorcycles riding for recreational purposes in the past few years, in nations such as the United States and Canada have contributed to the need for two wheeler parts in these regions.

Events which promote cross-country motorcycle riding or racing have gained popularity in recent years, and have created demand for high-power motorcycles, engines, and appropriate components, that can withstand the rigorous demand of such activities.

As a result, motorcycle chain sprockets that are compatible with O-type or X ring configurations are anticipated to see a higher rate of demand, to meet the increasing sales of high-end motorcycle variants.

The trend of recreational motorcycle riding is also growing in emerging economies owing to the rising disposable incomes of the middle class population base in these regions, creating new opportunities for motorcycle chain sprocket producers.

Technological Innovations Enhance Performance

Manufacturers are focusing on expanding their operations to countries in the Asia Pacific, owing to easy and cost-effective availability of raw materials and skilled labor, in addition to production-favorable regulations being set by local governments.

In addition, motorcycle chain sprocket producers are investing increasingly in the development of innovative products that feature new aspects such as reduced drag and high durability for increased lifespan.

For example, Ognibene S.p.A. a new range of silent sprockets for motorcycles that make use of rubber profiles on the sides, which significantly reduce noise during operations, while simultaneously increasing the lifespan, in combination with stainless steel, and molybdenum or chrome.

Similarly, CeraDure has introduced its range of lightweight sprockets for racing motorcycles that make use of aluminum parts that are protected by a patented layer of ceramic, in addition to self-lubricating coating of PTFE Teflon.

To gain additional information on the workings of the global motorcycle chain sprocket market, click here.

Rising Use of Heavy Naphtha in Aromatics to Increase Petroleum Liquid Feedstock Demand

Petroleum liquid feedstock is commonly used to generate the energy required to produce petroleum products. They are available as naphtha and gas oil, which can be further subdivided on the basis of ethylene, benzene, naphthalene, propylene, and hexane, for various purposes such as industrial solvents, petrol additive, gas, or cleaning liquids. Moreover, depending on the source, these feedstocks can also be segregated into wood, petroleum, or coal naphtha.

Global Dependency of Petroleum Boosts Requirements

The growth of the petroleum liquid feedstock market continues to largely rely largely on world’s high dependency of petroleum products for power production. Moreover, with the constantly expanding influence of the automobile industry, the consumption of petroleum liquid feedstock is expected to rise for the foreseeable future. This growth is further anticipated to be augmented by the high global commercial and industrial activity, and also the increasing use of these feedstock in the production of gasoline and synthetic aromatics.

As per a recent study by Future Market Insights on the global petroleum liquid feedstock market, in comparison to light naphtha, the applications of heavy naphtha are anticipated to rise significantly in the near future. Fuel and aromatics manufacture have been observed to be the primary drivers for the increased opportunities of petroleum liquid feedstock producers. While heavy naphtha is primarily used in refineries, it is also now being used as a reformer feed in the development of high octane gasoline as well.

Demand for Feedstock Rises with Applications of Heavy Crude Blending

The consumption of light naphtha is estimated to rapidly increase across the world, with the exception of the exception of Canada and the United States, largely owing to their movement from traditional petrochemical production processes to the use of steam cracking procedures.

The demand for petroleum liquid feedstock are currently arising from emerging economies in Asia and the Middle East owing to continual industrial expansion. On the other hand, the consumption of light naphtha is seen to be rising in North America, owing to its increased application for diluting heavy crude oils in the blending process in gasoline production and the isomerization of such fuels during enhancement process with the inclusion of octane additives. This is anticipated to positive influence petroleum liquid feedstock producers in the future.

Shale Gas Production Generates Innovations in Feedstock

Currently, the growth of the shale sector in North America has disrupted the worldwide chemical sector. Shale has enabled North America to join the Middle East in leadership for cost-effective production of ethylene. Moreover, the direct conversion of crude to chemicals provides the industry with savings in the cost of naphtha feedstock, in addition to reducing energy consumption and emissions by simplifying the process of naphtha production.

To find more information on the global activities of the petroleum liquid feedstock market, click here.

2019 Will Belong to Environment-Friendly Disposable Cutlery

Plastic pollution has been surpassing disaster levels in world’s oceans, where several cities such as Seattle are taking immense efforts in legislating ban on single-use plastic straws.

Development of Biodegradable Disposable Cutlery to Maintain Environmental Sustainability

The IRCTC (Indian Railways Catering and Tourism Corporation) recently launched biodegradable disposable cutlery on eight Rajdhani and Shatabdi trains, considering it as a minor effort in commemorating World Environment Day. The company is planning to use bagasse, fibrous remains of sugarcane juice, for making biodegradable disposable cutlery as well as containers, in order to serve meals in the long-run. Provisions has been made for collecting used packaging that would be processed later for disposal by means of composting, in order to safeguard environmental sustainability.

All-New Product Designs to Maximize Product Visibility

D&W Fine Pack LLC has planned for expanding its TamperSmart™ brand packaging line for increasing the production of products with exclusive tamper-evident features. SecureTab™ product line is the new addition, offering grocery stores and foodservice operations with further options in ‘on-the-go’ food applications. Along with SecureTab™, the packaging line also witnesses addition of VersaLock® and FreshServe® lids and containers. Each product range delivers easy-close and easy-open inline security tabs, which helps in maintaining freshness of the food along with its integrity, thereby boosting consumer confidence.

A rib-free and crystal-clear design helps in maximizing product visibility as well as enables easy applications of the custom labels on the smooth sidewalls. The highly-effective sturdy lids and inline tabs offer optimal stacking on the shelves. In addition, TamperSmart™ lids and containers are made up of recyclable PET resins along with the tabs that remain attached to packaging even after opening.

The all-new SecureTab™ and FreshServe® feature non-detachable and instructional pull tabs. All these tabs helps the consumers in quickly detecting regarding the reliability of the product. According to Senior Vice President of D&W Fine Pack LLC in marketing and sales, Keith Dunlap, constant growth in the on-the-go food sector together with shift in preparation and distribution methods are leading to increased demand for convenience food and innovative packaging. Most of all, the TamperSmart™ packaging enables in maintaining dry and cold food fresh, appetizing and intact, thereby supporting in expansion of customer-base.

Food Service Firms to Adopt Eco-Friendly Materials in Seattle

Seattle is recognized as the biggest city for cracking down usage of the single-use products consisting of plastics. Lately, the city declared ban on cocktail picks, utensils and plastic straws at each food service businesses that is inclusive of institutional cafeterias, food trucks, coffee shops, delis, grocery stores and restaurants. The city-wide ban states that the food service firms must opt for utensils and straws made up of eco-friendly materials. Compliant options are inclusive of compostable cocktail picks, straws and utensils. Utensils banned are inclusive of disposable cutleries.

Several cities and businesses are taking immense efforts in reducing negative impact on environment by means of ban on the single-use straws. According to city sources, disposable cutlery such as straws are expected to contribute towards marine water pollution on a major basis. The new ban on disposable cutlery in Seattle, especially utensils and plastic straws follows various other efforts taken up by the city in reducing the amount of waste product release.

EC Ban on Single-Use Products in a Bid to Reduce Plastic Pollution

EC (European Commission) is planning to ban on single-use plastic products including cotton buds, cutlery and straws, in order to clean the oceans. EC is planning to ban significant amount of items that make upto nearly 70% of the entire litter in the EU (European Union) beaches and waters. The main aim behind this development is to ban plastic products, in order to make the plastic produces bear waste management costs and cleanup efforts. Innovative and redesigning of products along with development of environmental friendly disposable cutlery products such as plastic drink stirrers and plates are likely to gain traction in Europe in the forthcoming years.

To gain more insights on the developments in disposable cutlery market, click here.

Environmental-Friendly Practices to Increased Electric Ride-on Mower Demand

Despite looking similar to off-road mobility vehicles, ride-on mowers are one amongst the most aspiring bits of technology. At present, many ride-on mower utilize petrol-driven engines, whereas some are comparatively powerful than others, which in turn makes the customers prioritize on horsepower specifications as well. They offer unrivalled visibility while dealing with the tricky edges and tight curves. In addition, effective and sustainable environment practices are raising the demand of electric ride-on mower, thereby offering energy efficiency and saving in fuel costs.

New Ride-On Flail Mower Optimizing Tasks at Steep Terrains

AS-Motor Germany GmbH & Co. KG recently launched an all-new ride-on flail mower – AS 1040 Yak 4WD, a combination of cutting-edge performance of flail mower along with comfort and climbing ability of AS 4WD ride-on mower. The all-new AS 1040 Yak mulches intense growth on the demanding terrain. The unique ride-on mower consists of compact design that offers stability on the slopes as well as in difficult terrain, whereas the flail mowing technology provides exclusive cutting force along with clean mowing results during high work rates. This new ride-on mower is highly beneficial for optimizing tasks at steep road embankments. With the combination of elements of hand-operated AS 940 Sherpa 4WD ride-on mower and AS 901 flail mower, AS-Motor has developed AS 1040 Yak 4WD, which proves as an ideal tool for catering to the demands of difficult terrains.

New Fire-Spitting Ride-On Lawn Mower Displays Carbon-Fiber Blades

A modified lawn mower named Mean Mower V2, recently witnessed integration of 999-cc four-cylinder by means of Fireblade SP motorcycle – Honda CBR1000RR. With this, Mean Mower V2 holds 190 horsepower to 60 hp, turning out to be a firecracker launched till date. This exclusive ride-on mower has two batteries that powers electric motors, spinning carbon-fiber blades. Shifts of the ride-on lawn mower are controlled by the carbon-fiber paddles on steering wheel, by reaching nearly 90 mph in the first gear. Chassis of Mean Mower V2 is made up of T45 steel for flexibility and durability.

All-New and Innovative Electric Riding Mower Charges Up With Just an LED Flash

Troy-Bilt®, manufacturer of outdoor lawn care and power equipment in America has lately developed the first ride-on mower powered by lithium-ion battery. The new development is likely to over-power the other all-electric lawn mowers developed so far. The all-new Troy-Bilt TB30 E functions whisper quiet and also emits zero greenhouse gases. TB30 E only requires 4-6hours to get charged while the others require 10-12hours and it wields just one blade, by chopping grass into sections over 30inches wide. Before a recharge, it functions for nearly an hour that is good enough for covering an acre. The new ride-on mower is compact in size and comprises of LED headlights along with USB ports for charging phones as well as various other gadgets.

To gain more insights on the new developments and innovations in ride-on mower market, click here.

Sustainable Packaging Technology to Transform Pulp Molding Machines Landscape In 2019

Consumer pressure for the marketers with regards to reducing amount of plastic entering the waste stream has never got better. However, the CPG firms are taking immense efforts in protecting and differentiating their products in this competitive retail environment. Molded fiber packaging has been witnessing considerable demand as it is biodegradable, recyclable and compostable. The trending green technology utilizes a propriety blend of natural and renewable fibers for producing custom packaging solutions, which can be molded in various shapes with increasing applications in specialty foods, cosmetics and personal care products amongst others.

Strategic Acquisitions Enhance Pulp Molding Machines Production

Cascades Inc., company operating in the pulp molding machines landscape in U.S has taken up immense efforts in multiplying its production capacity regarding ecological packaging produced in the moulded pulp. Cascades Inc. recently acquired Clarion Packaging and Urban Forest Products that are located in Clarion, Indiana and Brook. These plants exclusively manufactured moulded pulp protective packaging, which primarily serves the eggs as well as quick service restaurant industries. In addition, Cascades Inc. has also acquired maximum share in the Falcon Packaging, leader in distributing egg packaging. Most of all, this company is prioritizing on manufacturing and recovery of the green packaging as well as tissue products, which in turn dives-in immense demand supply of pulp molding machines.

Food Retailers in UK Adopting Eco-Friendly Packaging

Eliminating avoidable plastic packaging wastes has turned out to be one amongst the hottest subjects for UK food producers today. Food retailers in UK are taking immense efforts in adopting eco-friendly packaging methods thereby reducing the plastic packaging waste. There has been development of certain techniques in which can develop ‘go green’ packaging technology:

  • Manufacturers can replace the plastic packaging with eco-friendly and sustainable materials such as pulp trays and foam amorphous poly ethylene terephthalate (APET). Foam APET is recyclable and is produced from the recycled materials. Pulp trays are highly suitable for tray sealers.

Fiber Pulp Packaging to Promote Green Culture

With environmental consciousness, high-end look can also be attained with growing adoption of fiber pulp packaging. It is produced with the help of 100% pre-consumed materials such as cardboard and is also utilized for packaging of the premium food products. Fiber pulp packaging has been witnessed extremely popular in the Nordic markets where the green and environmental cultures are well developed. However, with growing customers in developing regions adopting healthy as well as environmentally conscious lifestyles, customers are also willing to pay premium prices for the sustainable packaging solutions. Fiber pulp is considered as an ideal choice for ready-to-cook meals and can also be transformed into trays, which have sealed compartments.

To avail further insights on developments in pulp molding machines market, click here.

In-wheel Motors to Witness Increased Applicability in Light-Weight Electric Vehicles

In-wheel motors provide improved economic performance and are also reliable with power supply flow straight form motor to wheel. Factors such as simple installation, silent operation and better vehicle control makes in-wheel motors system significantly beneficial over conventional vehicles. The retrofitting ability of converting any conventional petrol or diesel into electric vehicle (EV) without any modifications in the vehicle dives in growing possibilities for the increasing demand supply of in-wheel motors.

New Retro-Looking and Light-Weight Electric Vehicle Integrates In-Wheel Hub Motors

MW Motors, a start-up in Czech Republic recently launched an all-new retro-looking and light-weight all-electric vehicle along with integration of in-wheel motors. Even though usage of in-wheel hub motors is not a new concept, automakers are yet to implement the same on a broader aspect. The latest version of ‘Luka EV’ utilizes four in-wheel motors delivering nearly 4 x 12, 5 kW for overall output of approximately 50 kW. The in-wheel motors has been powered by 21.9 kWh battery pack, which according to the company is enough for 186miles (300km) range. The new car is an impressively low-weight vehicle with integration of modern car features.

Strategic Collaboration Enables Development of In-Wheel Electric Propulsion

Elaphe Propulsion Technologies Ltd., a leading technology firm, supplier and developer of in-wheel electric propulsion in Slovenia, meant for the hybrid and battery-electric vehicles lately launched an innovative in-wheel electric motor in collaboration with Brembo S.p.A (firm that delivers brakes for Tesla). This new development is expected to be an integral part of the operational L5e demonstrator vehicle. This new technology is anticipated to be industrialized with the best possible production commencing as early as 2020.

The Elaphe – Brembo collaboration has resulted in an air-cooled and modular in-wheel electric motor that pumps out astonishing direct-drive torque 256Nm, offering nearly 25 kW power per wheel. The advanced aluminium caliper incorporated in the stator of the all-new in-wheel electric motor enables in attaining superior motor compactness. The L5e demonstrator vehicle is recharged with the help of highly-effective regenerative braking. The main focus of this development is on various L-class vehicles, thereby utilizing the modular components for maintaining utmost cross-platform functionality as well as reduction in production costs.

New Weight-Saving Technology Transforms Electric Vehicles

Protean Electric, a firm focused on development of motors in U.S. lately introduced a ground-breaking in-wheel electric motor, meant for transforming electric vehicles. The company developed Protean Drive system that helps in saving space and weight, thereby making it easier for manufacturers in developing electric vehicles. This technology is exclusively applicable for the two-wheel drive electric vehicles, in order to hybridize existing vehicles and converting two-wheel drive vehicles into four-wheel drive vehicles. Protean Drive comprises of self-contained ‘smart actuator’, which is inclusive of a permanent magnet as well as synchronous electric motor, along with the electronics required to make it function. With the help of such self-contained in-wheel motors, elimination of driveshafts and transmissions takes place. It also helps in freeing space in center of the vehicle between driven wheels.

To gain more insights on the innovations in in-wheel motors market, click here.

Advanced Wound Management Centers to Enhance Consistency and Quality of Patient Care

Immense efforts are being taken by the private firms in developing new advanced wound management centers, especially in the developing regions. Increasing number of accident and trauma cases are witnessed across the globe, thereby stimulating the need for advanced wound management. According to WHO, over 1.25 Million deaths take place every year, attributing towards the road accidents. In addition, rapidly increasing patients suffering from chronic wounds are driving the need for propelling surgical procedures. Most of all, clinics and hospitals are entering into collaborations with the healthcare companies for advanced technology and healthcare services.

Two New Applications Enhance Overall Patient Experience

Healogics®, wound healing experts in Jacksonville, Florida, USA lately launched two new applications, supporting efforts to enhance patient experience, thereby saving time of physicians and clinicians. Decision Support and Clinical Optimization, two new applications of WoundSuite platform of Healogics helps the crucial connection between the patients suffering from chronic wounds and related multi-disciplinary healthcare team to attain patient-centered, evidence-based and collaborative care. Clinical Optimization and Decision Support are regarded as invaluable applications breaking new grounds in advanced wound management world. These applications help in enhancing clinical workflow and offers the physicians with actionable insights, resulting from the evidence-based medicines. With better data arrives better and positive strides in treatment as well as research of chronic wounds.

Strategic Collaboration Offer Hyperbaric Medications Center

Oneida Healthcare in New York recently entered into collaboration with RestorixHealth in USA for offering hyperbaric medicine and comprehensive wound care in Oneida, to patients suffering from non-healing wounds in Central New York. The new and advanced wound management is inclusive of treatments for ischemic ulcers, pressure, neuropathic, non-healing diabetic and chronic. In addition, treatments are also available for skin irritations, surgical wounds, traumatic wounds and venous insufficiency. Most of all, this new and advanced hyperbaric medicine and wound care center is aimed at singular vision, which is for offering patients with utmost advanced healing therapies closer to the house.

Long-Term Deal to Ensure Reliable Supply of Advanced Wound Dressings

Scapa Healthcare, reliable strategic outsource partner of the skin-friendly turn-key solutions, in Knoxville, Tennessee recently entered into a strategic agreement for acquiring Systagenix manufacturing plant in Gargrave, England for transferring the former’s regulatory support functions, R&D, warehouse facilities, sterilization services and manufacturing operations to Scapa Healthcare. Under this extended collaboration, the two companies will enter in a long-term supply and manufacturing deal for advanced wound dressings provided by KCI, an Acelity Company. With this acquisition, Scapa Healthcare is likely to take the lead amongst the advanced wound care product manufacturers in the world. Moreover, the new site will also help in enhancing the capabilities of Scapa Healthcare, its footprint and services for catering to the emerging needs of global healthcare industry.

To know more? Request a free sample report.

How Innovative Technologies are Shaping the Future of Event Planning

As events in addition to meetings keep on evolving into progressively complex experiences, event planners are seeking novel solutions which could aid them increase to the raised anticipations of attendees. They’re as well seeking modes to face the ever-present realness’s of more work when confronted with comparatively flat budget growth and time constraints.

Seeing that technology proceeds more and more faster, novel gadgets are brought out that aim to improve an experience or to resolve a problem. Artificial intelligence as well as immersive technology, chatbots, facial recognition, in addition to increased personalisation– these are barely a few of the tech trends causing a sizeable hit on the event sector.

Tweeted prize-hunts in addition to beacons, brands are in this day and age employing AI-powered chatbots to fulfill the on-going trend of personalisation. Seeing that brand loyalty is on the downslope, brands necessitate to be prominent from the rest in addition get outfitted to manage customer-service functions in the latest event scenario.

The technology that supports digital currency Bitcoin, provides crucial information, for instance, how much as well as to whom to be transposed in a private and secure way, facilitating large amounts of transactional info to be shared amid diverse parties. From an event look at, for instance, this entails that the technology can be utilized to validate registrations or to deal with the attendees’ data.

Moreover, Zero UI in which the communication is reactive and seamless to the people around it is gaining momentum. Technology-heightened moments are set off more naturally and experience more incorporated into the overall space. Experiences are turning out to be more measurable and accountable, with more elaborated key performance pointers being placed alongside the work because of the data available, mainly with improvements in motion-tracking and computer vision. Journeys around an environment can be easily followed and acknowledge more regarding the attendees’ demographics without the requirement for burdensome data-capture terminals.

Event-personalisation platforms like Feathr are gaining footing since it has proprietary technology which lets event organisers and marketers to leverage data by aggregating sources such as website analytics, social followers, CRM and registration, also to present multichannel campaigns.

Tracking as well as facial recognition incorporated with smart technology is in addition on the rise, goaded with the accessibility of more cost-efficient solutions. Although, this field necessitates caution as well as an ear to concerns in terms of privacy, nevertheless early adopters are considered to reap the benefits. In addition, augmented reality as well as virtual reality, based on event tech trends is likely to be the future big shift in this field comprising mixed reality.

Click here to read the full article

Immersive technologies such as VR,AR, binaural sound and gestural interfaces have the advantage of nurturing a more interactional, deeper as well as interesting connection with possible consumers, despite the fact that making customers experience that they have more control, these technologies could heighten brand stories – it’s the synergy between technology as well as the story which makes powerful experiences.

LTE Powered Push-To-Talk over Cellular Gaining Momentum as an Alternative to LMR Installations

With increasing adoption of Long-Term Evolution (LTE) networks in the mainstream for mobile communication, LTE is moving towards replacing Land Mobile Radio (LMR) as communications technology. Traditionally conducted on LMR networks, the communication was limited to the specific area. However, with the wireless technologies such as LTE and WLAN, communication becomes possible in more wide range and areas. This is driving demand for Push-to-talk over cellular powered by LTE as a feature-rich and cost-effective solution than LMR.

Owing to the growing demand for next-generation LTE networks across countries, the push-to-talk over cellular market is likely to witness significant growth, bringing in more than US$ 5,000 million by the end of 2026, according to a recent report by Persistence Market Research (PMR).

Large bandwidth architecture supporting video and other applications and providing support for mission-critical push-to-talk and push-to-video features, LTE is expected to witness growing demand from public safety agencies. Industries, particularly operating in hazardous areas with the need for one-to-one communication are providing push-to-talk over cellular solution to increase productivity and efficiency of workers in the field and to reduce business hardware cost.

New Industrial Developments Enhancing Relevance of Push-to-Talk over Cellular

Several new developments in industries is changing the dynamics of push-to-talk by making it more useful. Various recent developments in industries include the emergence of 3G and 4G networks, the adoption of industry standards of push-to-talk over cellular, and rapid adoption of broadband mobile data and integrated business applications.

Rapid evolution in mobile networks is visible with companies investing more to upgrade mobile networks. Companies are focusing on expanding LTE coverage covering more outside LTE areas. Push-to-talk over cellular is emerging as a high performance application with the wide availability of wireless technologies with advanced 3G and 4G technologies.

With the evolution of field force management, organizations are facing various challenges such as demand for real-time information including field status, fragmentation of communication technologies, reducing communication cost and increasing efficiencies, diverse needs of different functions of a mobile workforce. This is leading to the enhanced push-to-talk over cellular offerings from companies with new features. Push-to-talk enabled smartphones with GPS, leveraging existing cellular networks, integration of communication apps, and providing fast group communication are some of the new features offered by companies enhancing push-to-talk over cellular.

North America to Remain Lucrative in Push-to-Talk over Cellular Market

Advancement in next-generation technologies is driving the demand for new push-to-talk over cellular services in North America. With the wide application of public safety networks in North America, in-vehicle video system and vehicle-mounted records management system is moving towards using LTE. Moreover, industry experts believe that push-to-talk for cellular is likely to emerge as a top application for LTE in the near future.

Request For  Report Sample@  https://www.persistencemarketresearch.com/samples/17008     

Increasing penetration of Internet of Things (IoT) devices in various industries in North America is driving smartphone manufacturers to integrate push-to-talk over cellular services in their smartphone devices. Continues rise in the mobile workforce in other countries such as China, India, and the UK is resulting in the rapid growth in push-to-talk over cellular market in these countries.

Emerging Government Activities to Impact the Growth of the Indian Alcohol Business

A leading research analyst at Future Market Insights discusses the potential trends in Indian alcohol market that are expected to impact the business of Indian alcohol makers in future

The rapidly proliferating urban population and the significant spending by consumers on alcoholic beverages, is creating major growth opportunities for Indian alcohol makers. Adoption of modern lifestyle across the urban landscape coupled with the temporary stress relieving benefits of alcohol has majorly boosted the consumption of alcohol. However, certain government activities and changing regulations are expected to stir potential transformations in the forthcoming years.

What are the storming transformations that are expected to impact the overall liquor business in India?

Maharashtra State Government issued a notification on 31st Dec 2018 for the amendment of Maharashtra Potable Liquor Rules, 1996, to hike the excise duty on Indian alcohol. On account of this, mid-sized and premium Indian Made Foreign Liquor (IMFL) will experience a hike of 20 to 25 %, small brands will experience a hike of 5 %, while the foreign liquor brands will face an excise duty of about 4 %. This change is expected to majorly impact the Indian alcohol business.

What segment of alcohol is gaining major popularity among the consumers?

The premium alcohol brands are gaining major preference by Indian consumers owing to the growing abundance of the middle-class sectors and the proliferating per capita spending of consumers. An official at the Indian distiller company, Radico Khaitan Ltd. expressed his view on the progressive Indian alcohol market, where he stated that Indian consumers are spending more on premium alcohol, including brandy, whisky, vodka, and rum.

What are some of the budding trends likely to influence the Indian alcohol market?

Companies operating in alcohol landscape are increasingly focusing on making innovative developments in their product portfolio to enter the dry states that prohibit alcohol. Leading alcohol brands such as Heineken, London Pilsner, and Kingfisher plan to introduce non-alcoholic beer in the Gujarat state and others. This is expected to stir new developments in the Indian alcohol market over time.

How are alcohol manufacturers differentiating in the Indian alcohol landscape?

Indian alcohol manufacturers focus on innovating in terms of flavor to best cater consumer demands. Owing to this, several Indian alcohol makers plan to offer its Indian customers with the country’s heritage liquor. Indian alcohol manufacturers including Native Brews, Agave India, and Cazulo plan to manufacture alcohol from agave plant, mahua flower, and feni. Their primary aim is to develop a national alcoholic beverage for the nation, similar to the Scotch whisky from Scotland, apart from making the Indian consumers aware of the native taste and flavor.

What are the new regulatory requirements that need to be addressed by the companies operating in the Indian alcohol market?

Regulations pertaining to alcohol are amongst the key factors that need to be addressed by the Indian alcohol market players. The Food Safety and Standards (Alcoholic Beverages Standards) Regulations, 2018 specify requirements for labelling including the declaration of alcohol content, no nutritional information, labeling of a standard drink, no health claims, etc.

To know more? Download free sample report.